APC Gate Automation Safety Bundle Kit 2 (Retro Reflective Sensor)

Kit Includes

• APC Retro Reflective Safety Sensor – for gate opening system safety | Retro Reflective Gate Sensor(QTY: 1)
• APC-ULA Safety Light with Antenna(QTY: 1)
• 5m Coaxial Cable for Antenna(QTY: 1)
• 5m 2 Core Non-Shielded Cable(QTY: 1)
• Caution Sign – Keep Clear of Moving(QTY: 1)

Product Information

APC-RR-11 Retro Reflective Sensor

The retro-reflective Safety sensor set is used to prevent the closing cycle occurring during the case of the sensor path being interrupted by vehicles, trailers or any other obstacles.

If the gate begins to close and the sensor path is interrupted then the gate will stop and return to the open position.

The sensor ( which is the transmitter and receiver) is wired back to the control box of the gate system using the pre-connected cable. There is no requirement for wiring across the driveway using this type of sensor.

• Up to 11 Metres Infrared beam operating distance
• Only powers on when the command is given to close the gatesAlignment Misalignment led to assist in the installation process
• Resin filled for the ultimate weatherproofing

Universal Flashing light with Built In Antenna

• Multiple options for operating voltage from 12V – 265V in AC or DC
• Ultra Low Consumption of less than 3W
• Two operating modes available: Flashing illumination (1HZ) or Solid Illumination
• Bright Orange Casing for Great Day and Night time visibility
• Built in booster antenna connection
• Simple wiring using two core for the light and RG58/59 for antenna
• IP54 outdoor Rating

Automatic Gate Caution Sign

Lightweight plastic caution sign to warn pedestrians and vehicles that there is an automatic gate in place. Size is 290mm x 290mm