OZNALA With 517 Spray Tip Guard 3600PSI Airless Paint Sprayer Spray Gun High Pressure

Specifications:
Maximum operating pressure: 3600 psi.
Feed inlet：1/4 npsm.
Nozzle size: Optional.
Trigger: 4 fingers.
Immersion liquid : stainless steel, polyurethane, polyethylene, nylon, Teflon.
Color: Silver + red
No-Load Speed: 1200rpm
Nozzle Diameter: 1.7mm
Power Type: Pneumatic
Model Number: Spray Gun
Feed Type: Gravity
DIY Supplies: Paint and Decorating
Paint Spray Gun Material: Aluminum
Material of Sprayer Nozzle Seat Guard: Aluminum + Plastic
Craft: Aluminum Oxidation
Connector Thread Size of Sprayer Nozzle Seat Guard: G7/8*14

Steps to use:
1. First of all, the paint was removed to check whether there is a rupture damage, found that should be replaced immediately.
2. That will have the air pressure of the trachea access to the end of the handle end of the air inlet connection, you must check into the air outlet and each part of the connection whether have a leak, there is leakage phenomenon should be even maintenance.
3. According to the requirements of the quality of the paint required to adjust the application of the paint gun

Application of Paint Pigment:
High solid content epoxy paint and primer.
High solid content polyurethane topcoat and primer coatings.
Archiectural latex paint.
Coal tar epoxy primer.
Tanks and piping inner coating.